Fix Error Code in Canon Printers: October 2017

Tuesday, October 24, 2017

How to fix error 6C10 on Canon Printers Call Us Toll Free : +1-855-517-2433

How to fix error 6C10 on Canon Printers

This error appears on these printers: MP110, MP540, MP630, MP620, MP640, IP3600... and others...

Solution 1:

•    Move the printhead to the center.
•    Disconnect the printer and check on the right.

Solution 2:

•    Do a reset of the printer:
•    Power on
•    Hold down the "Resume" button .

Solution 3:

•    Power off the printer.
•    Open the door.
•    Power on.
•    When the cartridge is in the center, close the door.

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

How To Solve Error 6000 Or P03 On Canon Printers

Error 6000 or P03 on Canon printers

That is a line feed error.

Solution 1:

•    Verify that the paper tray is correctly set.
•    If any object is placed in front of the machine.

Solution 2:

•    Search for any small .

Solution 3:

•    Power off the printer.

•    Power on.

Solution 4:

one of these parts could be faulty:

•    Timing sensor unit QM2-2683

•    Timing slit disk film QC1-6229

•    Feed roller ass'y QL2-0925

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

How To Solve Error Code 6A80 On Canon Printers

Solution 1:

•    Switch the printer OFF
•    Press buttons.
•    Keep pressing.
•    Release the On/Off button.
•    After a few seconds.

Solution 2 :

•    I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion.

•    One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick.

•    I removed these pads and the printer returned to normal

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

Monday, October 23, 2017

Error Code list on some printers Canon Pixma

Error Code list on some printers Canon Pixma
•    E2-2 No paper (ASF)
•    E3-3 Paper jam
•    E4 No ink
•    E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
•    E8 Waste ink absorber full, or platen waste ink absorber full
•    E9 The connected digital camera / video camera does not support Camera Direct Printing
•    E14 The Ink cartridges whose destination are wrong
•    E15 Ink cartridge is not installed E16 - Ink remaining is unknown
•    E16 -E19 Failed to scan head alignment sheet
•    E22 Carriage error
•    E23 Paper feed error
•    E24 Purge unit error
•    E25 ASF(cam) sensor error
•    E26 Internal temperature rise error
•    E27 Waste ink absorber full or platen waste ink absorber full
•    E28 Ink cartridge temperature rise error -
•    E29 EEPROM error
•    E33 Paper feed position error
•    E35 15 USB Host VBUD overcurrent error - USB
•    E37 17 Abnormal motor driver error
•    E40 20 Other hardware error
•    E42 22 Scanner error

For Solutions Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Or

Call Us +1-855-517-2433 (Toll Free)

Tuesday, October 17, 2017

How to solve error code 5200 or P08 on Canon printers

This error indicate a printhead temperature rise error.

Solution 1:

• Power off.
• Power on.

Solution 2:

If the error persist:

- The printhead need to be replaced

- Or that's an electronic error

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

How To Fix Error P22 On Canon Printers

Error P22 on Canon printers

Error P22 or P,2,2 is a scanner error.

Solution 1:

•    Power off the printer
•    unplung the power cord
•    Plug in the power cord

Solution 2:

•    If the printer is still under warranty, contact the Canon support.

Solution 3:
•    The scanner unit or the logic board is defective. The best thing to do: buy a new printer !

If the above solution has not resolved your error,

Monday, October 16, 2017

How To Fix Error U051 On Canon Printers

Error U051 on Canon Printers

Failure: no print head installed. Install the print head. Cartridge Error

Solution 1:

•    Press the triangle button

Solution 2:

•    Reinstall the cartridges.

Solution 3:

•    If the error persists: verify that the contacts on the cartridges and the ink cartridge are clean.
•    Finally, it is possible that the printhead is defective.

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

How To Fix Error U072 On Canon Printers Call Us +1-855-517-2433 (Toll Free)

Fixing error U072 on Canon printers

Solution 1:

•    Open the cover
•    Remove the cartridges.
•    Power off the printer
•    Power on the printer
•    Close the cover.

Solution 2:

•    Verify that the ink tank are installed in the appropriate positions.

Solution 3:

•    Clean

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

Error "printhead not installed" 1401 1403 1405 on Canon printers

Error "printhead not installed" 1401 1403 1405 on Canon printers

The printhead is probably broken.

The last thing to try:

Remove the cartridges

Power off

Power on.

Installe cartridges.

Call Us +1-855-517-2433 (Toll Free)

Saturday, October 14, 2017

How to fix Error 5700 or ##356 on Canon printers

The 5700 error code is a ASF cam error. ASF Cam Sensor Error. When this occurs, the gears cannot rotate properly causing a grinding noise and 5 alternating blinks (SFP) or ##356

Solution:

Step 1: Remove the Left and Right Covers

Step 2: Remove the 4 mounting screws .

Step 3: Remove the Main Unit from the Bottom Case.

Step 4: Turn the Main Unit over.

Step 5: Inspect the ASF section of the Main Unit for a gap between the white plastic guide and the Chassis.

Step 6: Disc connect the appropriate cables and remove the Logic Board from the Chassis.

Step 7: Re-seat the white plastic guide so it sits flush against the Chassis.mounting screw hole. When seated correctly, the gap will no longer be present.

Step 8: Tighten the 4 mounting screws without

causing the plastic guide to shift.

Step 9: Reassemble the printer .

Step10: If You are not fix Call Customer Care +1-855-517-2433 (Toll Free)

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

Friday, October 13, 2017

How to solve error C000 on Canon Pixma MX870 and MX860

MX870, MX860, MG520...

Solution 1:

1.    Switch off the printer
2.    Disconnect the power cable
3.    Open door:

4.    Remove the orange protective tape (A) and remove the white polystyrene (protective equipment) (B).

5.    Verify in the printer there is no protective equipment:

6.    Connect the cable and switch on.

Solution 2 :

- Check for any foreign body.

- Check for any paper jams.

If the above solution has not resolved your error, Please Contact To Authorised Service For Canon Printers | Call Now +1-855-517-2433

Call Us +1-855-517-2433 (Toll Free)

Monday, October 9, 2017

Green and orange light alternatively blinking - Pixma Canon iP2772 Printer

When my Pixma Canon iP2772 Printer got a paper jam and after removing the paper jam my canon printer got another problem. Green and orange light alternatively blinking and it displayed on my monitor that “black and colored cartridges are not recognized”. But I simply calm because I know that this error is considered as minor.

What I had done to fixed my Pixma Canon iP2772 Printer problem. Just follow my simple and effective troubleshooting tips.

Procedures:

- I turn off the printer.
- I open the printer cover.
- I unlock the cartridge .
- I closed the printer.

After I done all of those steps my Pixma Canon iP2772 Printer working fine and I’ll continue printing my pending printing jobs. All is well.