Tuesday, May 30, 2017

How to Fix Canon Printer Error Code 6B10

Paper feed cam sensor error or Error Code 6B10


Condition: An error occurred in the paper feed cam sensor during paper feeding from the cassette, or the paper absorbing a large amount of ink jammed in the PF rear guide.

Problems and Solutions: 


Solutions : Call Now +1-855-517-2433


  • Jammed paper in the PF rear guide (when a large amount of ink was absorbed in the paper);
    - remove the jammed paper and foreign material.
  • check for foreign material or paper debris in the cassette or in the PF rear guide;
    - remove foreign material.
  • If other solution fail,then Call Canon Support at 855-517-2433

Tuesday, May 2, 2017

How to Solve Canon Printer Error Code 6B10

Paper feed cam sensor error or Error Code 6B10


Condition: An error occurred in the paper feed cam sensor during paper feeding from the cassette, or the paper absorbing a large amount of ink jammed in the PF rear guide.

    Jammed paper in the PF rear guide (when a large amount of ink was absorbed in the paper);
    - remove the jammed paper and foreign material.
    check for foreign material or paper debris in the cassette or in the PF rear guide;
    - remove foreign material.
    If other solution fail, replace one off the following part
    - PF pick-up unit
    - Logic board
If the above solution has not resolved your error, please contact +1-855-517-2433

How to Solve Canon Printer Error Code 5100

Canon Error Code 5100 Carriage error


Condition: An error occurred in the carriage encoder signal.


    Smearing or scratches on the carriage slit film
     - clean the timing slit film.
    Foreign material or paper debris that obstructs the carriage movement;
     - remove foreign material.
    Ink tank conditions;
     - re-seat the ink tanks.
    If other solution fail, replace one off the following
    - Timing slit disk film
    - Carriage unit
    - Logic board
    - Carriage motor

How to Fix Error 1200 in Canon MX Series Printers.


Error Code 1200

Description


The ink cover is open.



1.      Close the ink cover and wait for a while. Do not close the ink tank cover while you are replacing an ink tank.

If the above solution has not resolved your error, please contact your nearest Canon authorised service facility.

                         Or

Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

How to fix Error 1008 in Canon MX Series Printers.

Canon MX Series Printer Error 1008


Description:

This error occurred due to one of the following reasons -
  • There is no paper in the cassette (lower).
  • The paper source is incorrect.
  • Paper is not loaded properly.

1.      Load paper in the cassette (lower).

2.      Load paper in the paper source suitable for the paper size. 

The large size photo paper or plain paper such as A4, B5, A5, 8" x 10" (20 x 25 cm), Letter, or Legal, or envelope can be loaded in the cassette (lower).
3.      Align the paper guides with both edges of the paper when you load paper.
4.      Press the [OK] button to dismiss the error.
If the above solution has not resolved your error, please contact your nearest Canon authorised service facility.

                    Or 


Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

How to fix Error 1007 in canon MX Printers



Description:

This error occurred due to one of the following reasons -
  • There is no paper in the cassette (upper).
  • The paper source is incorrect.
  • Paper is not loaded properly.
  •  
Resolution:  Call Now +1-855-517-2433 

1.      Load paper in the cassette (upper).
2.      Load paper in the paper source suitable for the paper size. 

The small size photo paper such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm), or Hagaki can be loaded in the cassette (upper).

NOTE - If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) and try to print on it, a paper jam will occur.
3.      Align the paper guides with both edges of the paper when you load paper.
4.      Press the [OK] button to dismiss the error.
If the above solution has not resolved your error, please contact your nearest Canon authorised service facility
                                          OR 


Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

How to Fix Error 1001 in Canon MX 340 Printer

1001 - Orange light blinking 2 times


 Description:

No CD/DVD Tray is inserted within the printer.



1.      Open the paper output tray on the front of the device.
2.      Place the CD/DVD (with the printable surface facing up) onto the CD/DVD tray 

NOTE: Make sure that there is no dirt on the CD/DVD tray
Insert the CD/DVD tray within the inner cover, ensuring the tray is kept level.

Canon MX 340 Printer
Canon MX 340 Printer


1.      The above picture shows the CD/DVD tray
              2.       Press the [Resume/Cancel] button on the device to continue. 

If the above solution has not resolved your error, please contact your nearest Canon authorised service Call Us.855-517-2433.

How to Fix Error 1000 in Canon MX Series Printers

1000 - Orange light blinking 2 times


Description:
 
Call Now +1-855-517-2433
 
There is no paper in the rear paper tray at the back of the printer. 




1.      Insert paper into the rear tray.



2.      Press the [Resume/Cancel] button on the device to continue.

How to Fix Error 1003/E02 in Canon MX Series Printers.

1003/E02 - Orange light blinking 2 times


Description:

No paper in the cassette (paper tray).


1.      Insert paper into the cassette (paper tray).
2.      Press the [Resume/Cancel] button on the device to continue.


If the above solution has not resolved your error, please contact your nearest Canon authorised service facility. and Call Canon Help Center +1-855-517-2433.

Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433
 

How to Solve Error 1002 in Canon MX Series.

1002 Orange light blinking 2 times


Description:

No CD or DVD is present on the CD/DVD tray.


1.      Open the paper output tray on the front of the device.


2.      Place the CD/DVD (with the printable surface facing up) onto the CD/DVD tray 

NOTE: Make sure that there is no dirt on the CD/DVD tray
Insert the CD/DVD tray within the inner cover, ensuring the tray is kept level.


Canon Printers
Canon Printers



1.      The above picture shows the CD/DVD tray
2.      Press the [Resume/Cancel] button on the device to continue.

If the above solution has not resolved your error, please contact your nearest Canon authorised service Call +1-855-517-2433.

                          Or

Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433



How to Fix Error 2102 in Canon MX Series Printers.

Error Code: 2102
 
Description 
The machine has detected that the paper has been fed aligned to one side.

Resolution

1.      Load the paper into the centre of the front tray and then slide the paper guides to align with the both edges of the paper stack.

2.      Press the machine's [OK] button to dismiss the error.

Canon authorised service facility. please contact Canonauthorised service 855-517-2433. 


                                                              Or 


Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

How to Fix Error 1410 and 1414 in Canon MX Srires Printers



1410/1411/1412/1413/1414


Canon Printers
Canon Printers

Description

The ink tank cannot be recognised.

Resolution

1.      Open the ink cover and replace the ink tank with the un-lit lamp.
If the above solution has not resolved your error, please contact your Canon authorised service facility.

                                       Or

Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

How to Fix Error 1890/E40 in Canon MX Series Printers

Description The protective material for the FINE cartridge holder or tape may remain attached to the holder. Resolution ...