How to fix Error 1683 in Canon MX Series Printers

1683- Orange light blinking 13 times

Description:

The remaining ink amount is unknown.

Resolution:

1.      An ink cartridge that was once empty is installed in the printer.

2.      Replace the applicable ink cartridge with a new one.
NOTE: Printing with a once empty ink tank can damage the printer.

3.      If ink cartridge has been replaced, press the [Resume/Cancel] button on the device to continue printing

4.      If the above solution has not resolved your error, please contact Canon 855-517-2433

                                                         Or

Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433

How to Fix Error E15 and 1682 in Canon MX Series Printers

Error code: 1682/E15 - Orange light blinking 15 times

Description:

The ink cartridge is not recognised.

Resolution:

1.      Lift the printer cover up.

2.      Ensure a Canon ink cartridge is inserted and replace any non Canon cartridges if necessary.

3.      Press the [Resume/Cancel] button on the device to continue printing.

1.      If the above solution has not resolved your error, please contact Canon authorised service facility.

Fixing Check Ink 1682 and 1684 Canon Pixma Error Codes

  The Canon Pixma ‘Check Ink 1682′ and ‘Check Ink 1684′ error message will appear when your printer is having trouble recognising one or more of the cartridges. In most cases these codes will be accompanied by text stating “The FINE cartridge cannot be recognized” or “The ink cartridge cannot be recognized.” and some representation of whether it is the colour or black cartridge your printer is having trouble recognising.

Why am I getting the “Check Ink 1682/1684″ message?

 

Your printer uses a series of gold contacts on the front of the cartridge to communicate with the cartridge and receive information like estimated ink levels and the kind of cartridge it is. If these contacts have been partially obscured by dirt, ink, or have been damaged when being used/handled previously. Whatever the case your printer will need to be able to recognise both of the installed cartridges electronically before you can carry on printing

Is there anything I can do to resolve this error message?

 

There is no guaranteed workaround to get your printer up and running with the cartridges currently installed, but I can offer you some basic troubleshooting to hopefully clean up the contacts sufficiently. Please try the following:

•    Remove the problem cartridge(s). With any luck the error message you are getting will be specifying if the black or colour cartridge is the one causing the “Check Ink” message, if not remove both cartridges from your printer.

•    Wipe down the cartridge contacts. On the front of your cartridge you should see a small strip with a series of gold contacts on the front (as pictured above). Simply wipe down these contacts with a piece of kitchen tissue or another non-fibrous tissue. if you spot something particularly stubborn on the contacts they can be cleaned with an alcohol based cleaning solution or something similar.

•    Reinstall the cartridge(s). With the cartridges contacts as clean as possible reinstall the cartridge/cartridges into the correct position and close any open covers.

With any luck the “Check Ink 1682/1684″ error has now disappeared, leaving you free to carry on printing. If however it remains it is likely that the cartridges contacts have been damaged physically or stopped functioning electronically. Whatever the case, the next step is to try a replacement cartridge. I would recommend purchasing a brand new (preferably Canon original) cartridge, but if you have another cartridge to hand that you know ahas worked previously there is no harm in giving this cartridge a go.

If you are still having trouble getting your printer to recognise the cartridge(s) installed then it is likely that the contacts inside your printer may be the ones causing the problem.

 Visit To Technical Supports For Canon Printers | Call Now +1-855-517-2433