How to Fix Error 2001 in Canon MX Series Printers.

Error : 2001 - Orange light blinking 9 times

Description:

The connected digital camera or digital video camera does not support Camera Direct Printing.

Resolution:

1.      Disconnect the device from the printer by removing the cable from the printer and the device.

If the above solution has not resolved your error, please contact your nearest Canon authorised service facility using the link at the top of the page.

                                                                                                                                             

how to fix Error E14 and 1684 in CanonMX Series Printers

Error Code :1684/E14 - Orange light blinking 14 times

Description:

Ink cartridge is not supported (an ink tank that is sold in a different region from where the printer was purchased).

Resolution:

1.      Lift the printer cover up.

2.      Locate cartridge with no red light and replace with supported cartridge.

3.      Press the [Resume/Cancel] button on the device to continue printing.

4.      If the above solution has not resolved your error,

                                                                                                                                                   

How to Fix Error E06 and 1202 in Canon MX Series Printers.

Error Code1202/E06

Description

The paper output cover is open.

Resolution

1.      Close the paper output cover.

If the above solution has not resolved your error, please contact your nearest Canon authorised servicefacility. 

                                                                                                                                           

How to Fix Error Code 6A80 On Canon Printers

Error Code 6A80 On Canon Printers

Solution 1:

•    Switch the printer OFF

•     Press buttons.

•     Keep pressing.

•     Release the On/Off button .

•     (when the printer go ON).

Solution 2 (Thanks to Dick):

•    I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion.

How To Fix Error 6C10 On Canon Printers

 How To Fix Error 6C10 On Canon Printers 

This error appears on these printers: MP110, MP540, MP630, MP620, MP640, IP3600... and others...


Solution 1:

•    Move the printhead to the center.
•    Disconnect the printer and check on the right.

Solution 2:

•    Do a reset of the printer:
•    Power on
•    Hold down.

Solution 3:

•    Power off the printer.
•    Open the door.
•    Power on.

How to Solve Error E3 on Canon Printers

Error E3 is a jam error.

Solution 1:

•    Power on the printer.
•    Open the door for a few seconds and do a print job.

Canon Printers

Solution 2:

•    Check for any piece of paper in the printer.
•    After checking, install the paper .

Solution 3:

•    Take a sheet of normal paper .

•    Power off .

•    Insert the folded paper behind the printer.

Solution 4:

•    Push the red button.

How to Fix Error 1250/E17 in Canon MX Series Printers

1250/E17- Orange light blinking 3 times

Description:

The front door is closed.

Resolution:

1.      Open the front door to allow prints to exit.

Note - This error is detected at the start of printing or during printing.

If the above solution has not resolved your error, please