Solution 1:
• Switch the printer OFF
• Press buttons.
• Keep pressing.
• Release the On/Off button.
• After a few seconds.
Solution 2 :
• I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion.
• One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick.
• I removed these pads and the printer returned to normal
• Switch the printer OFF
• Press buttons.
• Keep pressing.
• Release the On/Off button.
• After a few seconds.
Solution 2 :
• I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion.
• One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick.
• I removed these pads and the printer returned to normal
